Sydney Abrasives and Tools
Filters
  • Cutter Type
    • TCT (88)
    • Dovetail (6)
    • Spiral Groove (4)
    • Ogee (9)
    • Chamfer (8)
    • Trim (4)
    • Reversible (1)
    • Diamond (1)
  • Guide Type
    • non bearing (61)
    • bearing (43)
    • Non Bearing (7)
    • Bearing (10)
  • Pack Type
    • Clam Shell (35)
  • Shank Diameter mm
    • 12.7 (35)
    • 6.35 (42)
    • 8 (22)
    • Female Thread (10)
    • 6.35 & 12.7 (12)
  • Type
    • Cove and Bead (4)
    • Trim (8)
    • Half Round (2)
    • Panel Pilot (2)
    • Round Nose (5)
    • Rounding Over (6)
    • Straight (24)
    • V Grooving (5)
    • Cove (6)
    • Dovetail (2)
    • Ogee (10)
    • Rebating (3)
    • Beading (3)
    • TCT (29)
    • Bearing (2)
    • HSS (4)
    • Inverted Trim (1)
    • Slotting (1)
    • Classical (1)
    • Chamfer (4)
    • Mortising (2)
  • Used For
    • Routing (35)
    • Router Bits (1)
    • Fibreglass (1)
  • Manufacturer
    • FESTOOL (35)
    • CARB-I-TOOL (19)
    • FLAI (75)
  • Categories
    • Router Bits (129)
Discounted Tools and Abrasives
List / Grid
Show:
Sort By:
  Package: in self-service display pack with clamping screw   ..
  Package: in self-service display pack with clamping screw ..
  Package: in self-service display pack   technical data ..
  Package: in self-service display pack   technical data ..
  Package: in self-service display pack   technical data ..
  Package: in self-service display pack   technical data ..
  Package: in self-service display pack technical data ..
  Package: in self-service display pack   technical data ..
  Package: in self-service display pack   technical data ..
  Package: in self-service display pack   technical data ..
  Package: in self-service display pack   technical data ..
  Package: in self-service display pack   technical data ..
  Package: in self-service display pack with ball bearing guide   ..
  Package: in self-service display pack with ball bearing guide   ..
  Package: in self-service display pack for semi-covered dovetail joints SZ 14 &..
  Package: in self-service display pack for semi-covered dovetail joints SZ 20 &..
  Package: in self-service display pack for semi-covered dovetail joints SZ 14 &..
  Package: in self-service display pack for open dovetail joints SZO 14   ..
  Package: in self-service display pack for semi-covered dovetail joints SZ 20 &..
  Package: in self-service display pack for open dovetail joint slots, SZO 20 &n..
  Package: in self-service display pack without bearing ball   ..
  Package: in self-service display pack   technical data ..
  Package: in self-service display pack replacement cutter for 482057 ..
  Package: in self-service display pack   Scope of delivery:..
  Package: in self-service display pack for slot joints FZ 10 and open dovetail join..
  Package: in self-service display pack for slot joints FZ 6 and open dovetail joint..
  Package: in self-service display pack for slot joints FZ 10 and open dovetail join..
  Package: in self-service display pack for slot joints FZ 6 and open dovetail joint..
D33.34 LU12.70 C12.7 R1-4 S1/2" Router bits designed for the production of decorative edges ..
D23.02 LU12.70 R1-6 S1/2" Router bits designed for the production of decorative carvings on ..
D44.45 LU15.88 C12.7 S1/2" Router bits specifically designed for chamfering wood panels and ..
D31.75 LU22.22 C12.7 S1/2" Router bits specifically designed for chamfering wood panels and ..
D34.13 LU12.70 C12.7 R1-3.6 S1/2" Router bits designed for the production of decorative edge..
D31.75 LU12.70 R1-4 S1/2" Router bits designed for the production of decorative carvings on s..
D38.10 LU15.48 C12.7 R1-12.7 S1/2" Router bits desinged for the production of the rounding o..
D25.40 LU12.70 C12.7 R1-6.3 S1/2" Router bits desinged for the production of the rounding ov..
D31.75 LU12.70 C12.7 R1-9.5 S1/2" Router bits desinged for the production of the rounding ov..
D12.70 LU12.70 S1/2" Router bits designed for the production of dovetail joints on soft or h..
D19.05 LU25.40 C19.05 S1/2" These bits are specifically designed for edge trimming of soft o..
D12.70 LU25.40 C12.7 S1/2" These bits are specifically designed for edge trimming of soft or..
D12.70 LU12.70 C12.7 S1/2" These bits are specifically designed for edge trimming of soft or..
D25.40 LU22.23 R1-4.8 S1/2" Router bits specifically designed to produce half round grooves ..
D19.05 LU19.05 S1/2" Router bits with carbide cutting tips designed for the production of hi..
D28.58 LU12.70 C12.7 R1-4 S1/2" Router bits designed for the production of decorative edges ..
D12.70 LU31.75 S1/2" Router bits specifically designed for trimming and drilling soft or har..
D31.75 LU12.70 C12.7 P9.52 S1/2 Router bits specifically designed to create precision rebate..
D28.58 LU11.51 C12.7 R1-4 S1/2" Router bits designed for the production of decorative edges ..
D6.35 LU12.70 R1-3.2 S1/2" Router bits specifically designed to produce round nose grooves o..
D9.53 LU25.40 R1-4.76 S1/2" Router bits specifically designed to produce round nose grooves ..
D38.10 LU19.05 C12.7 R1-12.7 S1/2" Router bits designed for the production of decorative edg..
D25.40 LU12.70 C12.7 R1-6.35 S1/2" Router bits designed for the production of decorative edg..
D31.75 LU14.29 C12.7 R1-9.5 S1/2" Router bits designed for the production of decorative edge..
D12.00 LU31.75 S1/2" Router bits specifically indicated for the production of any type of gr..
D12.70 LU63.50 S1/2" Router bits specifically indicated for the production of any type of gr..
D12.70 LU50.80 S1/2" Router bits specifically indicated for the production of any type of gr..
D16.00 LU25.40 S1/2" Router bits specifically indicated for the production of any type of gr..
D20.00 LU20.00 S1/2" Router bits specifically indicated for the production of any type of gr..
D19.05 LU16.00 S1/2" Router bits specifically designed for "V" groove cuts on soft or hard w..
D16.00 LU12.70 S1/2" Router bits specifically designed for "V" groove cuts on soft or hard w..
D33.34 LU12.70 C12.7 R1-4 S1/4" Router bits designed for the production of decorative edges ..
D23.02 LU12.70 R1-6 S1/4" Router bits designed for the production of decorative carvings on ..
D22.23 LU10.32 C12.7 S1/4" Router bits specifically designed for chamfering wood panels and ..
D28.58 LU12.70 C12.7 R1-4 S1/4" Router bits designed for the production of decorative edges ..
D28.58 LU12.70 C12.7 R1-4 S1/2" Router bits designed for the production of decorative edges ..
D34.13 LU12.70 C12.7 R1-3.6 S1/4" Router bits designed for the production of decorative edge..
D19.05 LU12.70 R1-4 S1/4" Router bits designed for the production of decorative carvings on ..
D38.10 LU15.48 C12.7 R1-12.7 S1/4" Router bits desinged for the production of the rounding o..
D25.40 LU12.70 C12.7 R1-6.3 S1/4" Router bits desinged for the production of the rounding ov..
D31.75 LU12.70 C12.7 R1-9.5 S1/4" Router bits desinged for the production of the rounding ov..
D12.70 LU12.70 S1/4" Router bits designed for the production of dovetail joints on soft or h..
D12.70 LU25.40 C12.7 S1/4" These bits are specifically designed for edge trimming of soft or..
D9.53 LU12.70 C9.52 S1/4" These bits are specifically designed for edge trimming of soft or ..
D19.05 LU25.40 C19.05 S1/4" These bits are specifically designed for edge trimming of soft o..
D25.40 LU22.23 R1-4.76 S1/4" Router bits specifically designed to produce half round groov..
D19.05 LU19.05 S1/4" Router bits with carbide cutting tips designed for the production of hi..
D28.58 LU12.70 C12.7 R1-4 S1/4" Router bits designed for the production of decorative edges ..
D6.35 LU19.05 S1/4" Router bits specifically designed for trimming and drilling soft or hard..
D31.75 LU12.70 C12.7 P9.52 S1/4 Router bits specifically designed to create precision rebate..
D28.58 LU11.51 C12.7 R1-4 S1/4" Router bits designed for the production of decorative edges ..
D9.53 LU6.35 R1-4.76 S1/4" Router bits specifically designed to produce round nose grooves o..
D6.35 LU12.70 R1-3.18 S1/4" Router bits specifically designed to produce round nose grooves ..
D38.10 LU19.05 C12.7 R1-12.7 S1/4" Router bits designed for the production of decorative edg..
D31.75 LU14.29 C12.7 R1-9.5 S1/4" Router bits designed for the production of decorative edge..
D10.00 LU20.00 S1/4" Router bits specifically indicated for the production of any type of gr..
D12.00 LU31.75 S1/4" Router bits specifically indicated for the production of any type of gr..
D12.00 LU20.00 S1/4" Router bits specifically indicated for the production of any type of gr..
D16.00 LU20.00 S1/4" Router bits specifically indicated for the production of any type of gr..
D20.00 LU20.00 S1/4" Router bits specifically indicated for the production of any type of gr..
D3.00 LU8.00 S1/4" Router bits specifically indicated for the production of any type of groo..
D3.97 LU10.32 S1/4" Router bits specifically indicated for the production of any type of gro..
D5.16 LU12.70 S1/4 Router bits specifically indicated for the production of any type of groo..
D6.00 LU25.40 S1/4" Router bits specifically indicated for the production of any type of gro..
D6.00 LU15.88 S1/4 Router bits specifically indicated for the production of any type of groo..