• in

    Popular

    Easy Ways To Find The Best Tradies For Your Project

    Find Good Tradie Sydney

    Any renovation project will only turn out as good as the tradesmen involved in it. With that said, it involves the entire team that work to make the dream you have about your project that make it come alive and become a reality.

    Find Good Tradie Sydney

    There are two most basic secrets when it comes to Tradies:

    1. Always properly investigate the contractor or tradesman and their business that you plan to hire. Regardless how big or how small the project may be, regardless of how trivial the job may seem to you, make sure you know their full details and especially followed up some references.
    2. Once you found a great Tradie, recognise their value, and demonstrate some appreciation. One certain way you can recognise and appreciate a great tradesman is to pay them on time according to your specified payment terms. Although they do get paid to do a job, do complement and acknowledge a job well done. In addition, any project will cause tense situations, remain calm, reasonable, and determined in all your dealings.

    Ways To Find The Best Tradies:

    1. Request recommendations from family friends, family, and colleagues. In the majority of instances where these people make recommendations it is highly likely that you will have the opportunity to have a personal look at the work they have done for these people too. This however does not mean you do not have to do your own homework properly, make sure you still investigate their business and reputation.
    2. Make sure you that you scrutinize the builder you are going to use extremely well. Regardless if he comes recommended by someone in your inner circle, ask to speak to the owner of the current and previous project he is working on. At the point where you are ready to put your hand to paper, ensure that the smallest most trivial detail is noted and familiarise yourself with every single term and condition to prevent any unhappiness when it becomes too late to make changes. When pricing is concerned, it is by far better to set a fixed priced contract than a daily or hourly rate that encourage dragging jobs.
    3. Scrutinise every single tradesmen you will use on your project. There is simply no reasonable excuse not to do it. Ensure that all licenses and certifications and especially insurance is in place and that it is for the specific task they have to perform. It is always good practice to have a copy of their licences, certifications, and insurance policies. Be especially attentive to Public Liability Insurance and Home Warranty Insurance.
    4. Good practice states that one always get at least 3 quotations for any type of job you need done. A well established Tradie will have a very good idea of what prices are and how much a job will cost more or less, while a newbie in the trade will have a struggle to know it all at hand. A general rule of thumb is that the midrange quotations provide you with the most realistic indication of what the cost of a project might be.
  • in ,

    Popular

    DIY or Contractor? Your Home Improvement Projects.

    Hire Professional Tradie Builder Sydney

    Hire Professional Tradie Builder Sydney

    Being a home owner is a good investment but it is no secret that it can be a costly one too. Apart from the mortgage payment, there are costs like utilities, property taxes, insurance, and the typical routine maintenance.

    If you are able or skilled to do this yourself, you can save significantly on labour costs alone. However, because you are skilled or able to DIY does not mean you have to. Difficult or complex work such as electrical, plumbing, or tile setting is better left to the experts. Work such as painting where little or no skills are needed such as painting is definitely something you can put your hand to and save some money.

    The hard part is to decide what part of your project can you do yourself and which part should be hand over to a professional expert.

    How To Determine What Tasks to DIY

    Regardless of how skilled you are, there are some tasks that are reserved for skilled professional experts only without hesitation. There are three main considerations when you want to determine if you should DIY or get a professional.

    1. Safety
    There are three prominent indications that a task should rather be left for a professional to do:

    • Can it be fatal?
      The main question should be what if you do it wrong, is it possible that the outcome can be fatal. If so, it is a task for a professional. This is usually electrical or roofing related tasks.
    • Can it wreck or damage your home?
      Here we specifically refer to plumbing works. A slight oversight can turn a small initial unnoticed leak into weakened walls or foundations that can cause collapsing or serious structural damage.
    • Is a permit or license necessary?
      If the answer is yes, it is evident that certain skills and expertise is required to ensure a safe and secure outcome. It is not debatable.

    2. Difficulty
    If you have no idea how to do a specific job, then it is apparent that you should not consider DIY. There here are a few questions you can ask yourself to know if a job is too difficult for you.

    • Is it risky?
      If there is any risk involved, rather leave it to the experts, especially if there is a certain degree of know how required that draws back to safety concerns.
    • Will it be costly to rectify mistakes?
      Even if there are no safety risks, having to pay extra afterwards for a professional to rectify your DIY mistakes is always costly, in fact it will cost you more than what you would have saved.
    • Could it affect the value of the house?
      There are some imperfections that you can hide with clever techniques, but poor, cheap, inferior looking DIY projects are not part of those small imperfections. It most definitely will have a negative influence on the value of your house. If you can not do it like a pro, rather get the pro to do it.

    Do It Yourself or Hire Professional?

    3. Time
    In the most instances, DIY is simply more cost effective especially if you are on a tight budget. However, you should consider time wise if it is really economical. In the majority of cases professional jobs are pricey because it consumes time. There is also no sense in doing it yourself and it takes 12 months to complete if it would take a contractor only 4 weeks.

    Here is how you establish if DIY is a cost effective option time considered in these 5 easy steps:

    1. Establish the cost of a professional
      Obtain a few quotations for the task you need done from professional contractors.
    2. Calculate the cost of DIY
      Carefully calculate how much it would cost you to do it yourself. Remember to include tools, permits if needed, and all materials.
    3. Work out cost difference between professional and DIY
      Subtract the total cost of the professional quotation from your DIY cost. Now you know how much cost you will save money wise
    4. Calculate the time required
      Depending on your skill level and experience you need to calculate the time it will take you to do the job. Different levels of skill require different time frames. If you are a novice, remember it will likely take you longer.
    5. Calculate your DIY hourly wage
      With both the cost saving and time required estimates, divide the cost by the time. The answer is the DIY per hour rate. Are you happy with the per hour rate? Is it really worth all the effort and time?
  • in , ,

    Popular

    Why Licensed Electrical Contractors Should Be Your Only Choice

    Sydney Electrician Store

    Sydney Electrician Store

    As time moved on, technology became more advanced, electricity certainly did not take the back seat. Long gone are the days that electricity is merely a simplistic stream of energy that makes a light bulb glow. As with every other modern day comfort and luxury, electricity too became extremely multifaceted and complex. Therefore the simplest mistake can end in disastrous results.

    With this in mind it becomes more understandable why it is better to hire a licensed electrical contractor and rather avoid the urge to perform any kind of electrical maintenance, repairs, or upgrade work yourself.

    Whether you need any kind of electrical work done at your house or business, a licensed electrical contractor should be your only consideration and choice.

    Licensed Electrician Servicing Commercial Building

    Here are the 4 main reasons why an accredited licensed electrician is the only option you should consider:

    1. Safety
      It has been said over and again, and it can not be stressed enough how dangerous working with electricity. It is paramount to use only electrical contractors that are professional, skilled, and highly trained. The only way you can be sure that you are using a properly skilled and trained contractor that have sufficient experience is to make use of one that is licensed. Licensed electricians are aware of the relevant safety precautions that need to be taken to ensure a job is performed safe and secure with the minimum risk.
    2. Cost Effective
      Electrical work can be very expensive if not done right and especially if the right service codes or standards are not followed. A licensed electrical contractor will certainly save you money on the long term. Unlike with uncertified electricians, a licensed electrician guarantees his work. Should there be any problems after the work is done, you will not be liable for additional costs or labour fees should the original work is not up to standard or need alterations.
    3. Proficient and Prompt Services
      Making used of a licensed electrician provides you with the peace of mind that you are dealing with a contractor that is qualified and have the expertise to deal with all the possible types of electrical work and problems in a prompt and proficient manner.
    4. Extensive Skills and Expertise
      Choosing a licensed electrical contractor for your electrical work ensures that he have extensive skills and expertise that is needed to perform his work in an accurate, safe, and prompt manner according to the relevant codes. In order to become a licensed electrician, you need to undergo stringent testing and displaying of a large selection of intricate skills and expertise before certification is awarded and a license is issued.

    A licensed electrical contractor should be your only choice for any type of electrical work needed at your residence or business premises. You can rest assured that these contractors have up to date equipment, expertise, and professionalism to deal with all your electrical needs faster than you can say “spark”!

  • Ezelap 200 x 75mm Double Sided Diamond Plates

    Ezelap 200 x 75mm Double Sided Diamond Plates

    Most woodworkers need two grits to sharpen their tools – a medium or fine grit to touch up edges and super-fine to finsh off. These double-sided plates offer great value-for-money as you can get both in one compact package.

    Each sharpener is approximately 2.7mm thick and uses the same high-quality industrial diamonds as all Ezelap products and the two plates are set into a durable plastic cradle that maintains long-term durability and plate flatness.

    Plate size is 200x75mm with a number of grit combinations available.

  • Festool ETS150/3 EQ-PLUS Sander in Systainer box

    FESTOOL ETS 150/3 Random Orbital Sander

    Make light work of sanding

    The Festool ETS 150/3 Eccentric Sander is a favourite for fine and extra-fine finishing sanding. Its 3mm sanding stroke produces an excellent surface finish, and the lightweight, compact size makes work tireless and comfortable. A softgrip surface enables you to sand horizontal, vertical or overhead without exerting excess force, while intelligent MMC electronics ensure constant speed under load and protect against overheating. Used optimally with Festool Multi-Jetstream pads and abrasives, and a Festool Dust Extractor, the perfect, dust-free finish is guaranteed with every job. The sander is covered by Festool’s comprehensive 3-year warranty.

    Main Applications

    • Finish sanding on paintwork, wood and plastic
    • Pre-sanding for polishing
    • Pre-sanding wooden surfaces for waxing
    • Final sanding of mineral materials
    • Final sanding of fillers

    Strengths And Benefits

    • 3mm sanding stroke for excellent surface finish
    • Dual bearings for a long service life
    • Lightweight at only 1.8 kg for all day, effortless work
    • Sanding pad brake for safe, faultless work – no rework
    • Stepless speed preselection, constant speed under load

    Technical Data

    • Power consumption : 310 W
    • Speed : 4,000-10,000 min–¹
    • Connection Ø d/e : 27 mm
    • Sanding stroke : 3 mm
    • Interchangeable sanding pad Ø : 150 mm

  • Star-M Ceramic Edge Trimmer

    Ceramic Edge Cleaner

    This Ceramic Edge Trimmer is an essential tool for furniture and cabinet makers.

    Trims: veneer, PVC, and tape, quickly and smoothly leaving a clean finish.

    Blade: this will leave a square profile.

    These trimmers come in 2 types:
    square profile
    chamfer cut

  • Virutex Lock mortiser FC116U

    Virutex Lock mortiser FC116U

    Specially designed for quick, precise mortising on doors or other elements, either at the work site or in the workshop. Its special fixing system allows the mortising of doors that have already been hung, without damaging the surface. Its quick measurement adjustment permits multiple mortises to be made in record time. Also able to work horizontally. For mortising grooved doors or those with overlap, there is an adjustment system to centre the machine. Optional bits are low-cost and easily inter-changeable, which keeps the preparation of the FC116U to a minimum when mortising fittings for lock fronts. It comes factory-equipped with tool UT16I, which allows for making quick, precise transverse holes for inserting handles and other parts. Equipped from factory with hard metal lock mortiser bit Ø 1”, locking bar to make mortises on several doors at the same height, rubber protectors for delicate jobs, service keys and dust collector connection.

    Specifications
    Double insulation
    Input power: 1.100 W
    Max. bit Ø: 30 mm
    Max. mortising depth: 0-125 mm
    Max. mortising length: 177 mm + Ø fresa/bit/fraise
    Max. clamp vise opening: 190 mm
    No-load speed: 23.000/min

    Standard equipment
    Equipped from factory with carbide lock mortiser bit Ø 16 mm, locking bar to make mortises on several doors at the same height, rubber protectors for delicate jobs, UT16I, service keys and dust collector connection.

    Optional accessories
    1645287 UP16I Clamp extension

    1640148 Carb. drilling bit* 2 c. Ø 18 mm
    1640149 Carb. drilling bit* 2 c. Ø 23 mm

  • Virutex Edge lipping planer CE53S

    Virutex Edge lipping planer CE53S

    Special purpose planer for flushing works in the manufacture of furnitures. It is ideal for flushing strips on edges. Provided with a large support surface to allow easy and safe operation. The tool cuts accurately and is easily adjustable. The support base is height-adjustable with respect to the cutting plane of the cutter-holder. Thanks to its high power rating (1,300 W) it can be operated without risk of mechanical fatigue. It is provided with replaceable reversible carbide blades which do not require adjustment and dust collector connection.

    Specifications
    Double insulation
    Input power: 1.300 W
    Planing width: 55 mm
    No-load speed: 10.000 /min
    Weight: 6,5 Kg

    Optional accessories
    6446073 Standard dust collector attachment 2.25 m

    Blades:
    5346072 Set of 2 HM reversible blades
    5346071 Set of 2 HSS reversible blades
    5399059 Reversible blades holder