Sydney Abrasives and Tools

TORMEK Square Edge Jig SE-76

TORMEK Square Edge Jig SE-76
Product Code: SE-76
.

TORMEK Square Edge Jig SE-76

 

Design

The jig (1) comprises an upper base with a lower clamp and two locking knobs for fixing the tool. The jig slides on the Universal Support on nylon bushings across the grindstone. The edge angle is set with the Micro Adjust (4) on the Universal Support (5).

There are two safety stops to prevent the tool from slipping off the stone when grinding. One inner stop (2) to be positioned according to the width of the tool and one outer stop (3) mounted on the end of the Universal Support.

The jig automatically lines up the chisel to its upper, flat side so the tool always mounts correctly and grinds at 90°. Conventional jigs need manual alignment.

The lower clamp has a ridge in the centre enabling shorter tools with a tapered shank to be firmly mounted, e.g. Japanese chisels. The upper base, which lines up the tool, is designed so the clamping pressure is distributed to the ends and the tool mounts firmly without a heavy tightening of the knobs.

The jig is designed for grinding towards the edge with the Universal Support placed vertically and for honing away from the edge with the Universal Support placed horizontally.

PDF Square Edge Jig SE-76 Instruction.

Square Edge Jig design

 

Product Specifications

Delivery

Specification

Type
Sharpening Equipment
Used For
Sharpening
Shipping estimator
Calculate the estimated shipping cost for this product.
* Country:
* Region / State:
* Post Code:
Calculate
Ask a Question

Do you have any questions about TORMEK Square Edge Jig SE-76?

Contact us for price and availablity. Call us on 02 9939 3359 or use the form below.
Your Name:
Your Email:
Your Phone:

Your Question:
Enter the code in the box below:



Leave Reviews & Comments about this product

comments powered by Disqus