Please call the store on 02 9939 3359 to place order.
Radius trimmer, for trimming edges of PVC and veneer. Equipped with a bit of r=3 mm with bearing. Optional bits are also available for several different radius. It allows to trimm the four sides of the board at once. Powerful motor (750 W) and electronic speed adjustmnet. Also equipped with electronic control maintaining the speed constant, independently than the working load. Dust collector connection and three bases (hole Ø 20, 26 & 30 mm) for using with bits of different diameters.
Double insulation | |
Input power: | 750 W |
Chuck collet: | 8 mm |
No-load speed: | 14.000-30.000 /min |
Weight: | 1,6 Kg |
1222084 Chuck collet 6 mm 1222085 Chuck collet 6.35 mm (1/4") 5600050 Head CA56G 1140109 HM bit r=6 mm with ball bearing 1140110 HM bit r=8 mm with ball bearing
Operating instructions | |
Spare parts drawing |
Calculate the estimated shipping cost for this product. | |||
* Country: | |||
* Region / State: | |||
* Post Code: | |||
Calculate |