Hot melt portable edgebander. For PVC, ABS, melamine, laminate or veneer tapes, previously cut to the wanted length, on straight, round or shaped panels. Very practical for small manufacturing series due to its easy operation and fast adjustment. The height tape adjustment and panel thickness is very easy and intutive. Equipped with assisted tape feeding and electronic speed control to work at the most convenient speed.
With electronic temperature control the machine is also equipped with a precise control for the glue dosage on the tape.
Glue pot and tape sliding base covered by Teflon® for an easy cleaning and maintenance.
Standard equipment
Bag of glue 250 gr.
Input power: | 830 W |
Adjustable working temperature: | 120 - 200°C |
Adjustable working speed: | 2, 4, 5, 6 m/min |
Panel thickness: | 10 - 62 mm |
Tape thickness: | 0,4-3 mm |
Tank capacity: | 230 cm3 |
5046525 Table MEB250 for stationary operation
5600510 TrimmIng set FR256N
2800000 Hand edge trimmer AU93
2100000 Hand end cutter RC21E
2100600 Hand end cutter RC221R (2 mm)
5245922 Hand end cutter RC321S (3 mm)
2599266 Container of special glue 3 kg
5045753 Vacuum table SFV50
5045833 Vacuum table SFV150
5046400 Pneumatic tilting and swivelling clamping system SVN460
Cantspray, silicone free non-adherent spray to avoid the glue to stick on the rollers.
Adjustable guide support with scale in millimetres.
Temperature adjustment (120 to 200°C) controlled by microprocessor for higher accuracy on measurement.
Temperature increasing by impulses. Protects the heating elements increasing their working life.
Speed adjustment controlled by microprocessor.
Glue pot and tape sliding base covered by Teflon® for an easy cleaning and maintenance.
Calculate the estimated shipping cost for this product. | |||
* Country: | |||
* Region / State: | |||
* Post Code: | |||
Calculate |